|This product has been discontinued. It can no longer be found in retail stores.|
1.2L of water
The XP 110 is a 1998 XP Larami Super Soaker that holds 1.2L of water. It is a fairly large soaker and is the successor of the 1996 XP 105. The XP 110 featured a pressure gauge, something not many Super Soakers had even until that point, along with two pressure chambers. The XP 110 was discontinued a few years later to make way for more powerful blaster designs, such as the XP 270 and XP 310. It is no longer available as its home line has since been discontinued. It is classified as an air blaster with a separate pressure chamber.
The XP 110 is a standard rifle-sized soaker, with a blue body with red accents, purple reservoir, dual purple pressure chambers and a yellow pump, occasionally with black accents. The reservoir of the blaster has a tethered cap to prevent loss of the cap, and the reservoir is sloped back to allow all water to be used.
The XP 110 has internals standard for air blasters for its time. It has a pinch-tube trigger, hoses, two separate firing chamber and an air pump among other things.
The XP 110 was the successor of the older XP 105.
Like most other blasters, the XP 110 has faults. The main fault with the soaker is that it is rather weak compared to blasters of today, due to its small nozzle; the XP 110 has been somewhat outclassed by newer XP blasters, but still manages to hold its own.
How to Fire
Step 1 - Unscrew the tethered cap and load the reservoir with water.
Step 2 - Screw the cap back on.
Step 3 - Pump the blaster 11-12 times.
Step 4 - Pull the trigger to fire a stream of water.