Editing XP 310

{{Banner|ss}}

{{Discontinued}}

|Image = XP310.jpg

|Price =

|Family = [[XP]]

|Plunger =

|Add = {{R}}}}

The '''XP 310''' is a [[2000]] [[XP]] [[Larami]] [[Super Soaker]] that holds 1.2L of water. It is a fairly large soaker and is the successor of the [[1998]] [[XP 110]]. The XP 310 featured a pressure gauge, something not many Super Soakers had even until that point, two pressure chambers and a nozzle selector, something [[XP 250|only one other XP Super Soaker]] had until then. The XP 310 was discontinued a few years later to make way for more powerful blaster designs, such as the [[Max-D 6000]]. It is no longer available as its home line has since been discontinued. It is classified as an air blaster with a separate pressure chamber.

== Description ==

The XP 310 is a standard rifle-sized soaker, with a blue body with red accents, clear yellow reservoir, dual clear yellow pressure chambers and a black angled pump. The reservoir of the blaster has a tethered cap to prevent loss of the cap. The XP 310 has four nozzle settings; 1×, 1.2×, 1.5× and 2×.

== Internals ==

The XP 310 has internals standard for air blasters for its time. It has a pull valve trigger, hoses, two separate firing chambers and an air pump among other things.

== Blaster Co-relation ==

The XP 310 was the successor of the older XP 110.

== Faults ==

Like most other blasters, the XP 310 has faults. The main fault with the soaker is that it is rather weak compared to blasters of today, due to its low-powered nozzle settings; the XP 310 has been somewhat outclassed by newer XP blasters, but still manages to hold its own.

== How to Fire ==

{{Step|1|Unscrew the tethered cap and load the reservoir with water.}}

{{Step|2|Screw the cap back on.}}

{{Step|3|Pump the blaster 11-12 times.}}

{{Step|4|Pull the trigger to fire a stream of water.}}

==Commercial==

[[File:XP 310 Commercial|thumb|center|335 px]]