|This product has been discontinued. It can no longer be found in retail stores.|
1.47L of water
The XP 310 is a 2000 XP Larami Super Soaker that holds 1.2L of water. It is a fairly large soaker and is the successor of the 1998 XP 110. The XP 310 featured a pressure gauge, something not many Super Soakers had even until that point, two pressure chambers and a nozzle selector, something only one other XP Super Soaker had until then. The XP 310 was discontinued a few years later to make way for more powerful blaster designs, such as the Max-D 6000. It is no longer available as its home line has since been discontinued. It is classified as an air blaster with a separate pressure chamber.
Description[edit | edit source]
The XP 310 is a standard rifle-sized soaker, with a blue body with red accents, clear yellow reservoir, dual clear yellow pressure chambers and a black angled pump. The reservoir of the blaster has a tethered cap to prevent loss of the cap. The XP 310 has four nozzle settings; 1×, 1.2×, 1.5× and 2×.
Internals[edit | edit source]
The XP 310 has internals standard for air blasters for its time. It has a pull valve trigger, hoses, two separate firing chambers and an air pump among other things.
Blaster Co-relation[edit | edit source]
The XP 310 was the successor of the older XP 110.
Faults[edit | edit source]
Like most other blasters, the XP 310 has faults. The main fault with the soaker is that it is rather weak compared to blasters of today, due to its low-powered nozzle settings; the XP 310 has been somewhat outclassed by newer XP blasters, but still manages to hold its own.
How to Fire[edit | edit source]
Step 1 - Unscrew the tethered cap and load the reservoir with water.
Step 2 - Screw the cap back on.
Step 3 - Pump the blaster 11-12 times.
Step 4 - Pull the trigger to fire a stream of water.